PRGR RS Red Driver
PRGR Red driver now joins the RS family as “RS Red!” This is an indication that the traditionally more friendly and forgiving Red series to lean more towards the athletic player audience. Along with its GiriGiri (meaning “right at the limit”) enhanced resilience, the characteristic of the RS RED Driver is its speed design that gives the head more acceleration for maximum carry. The forged cup face has a W Crown design similar to the RS series drivers featuring a wider flange that lets the face flex substantially regardless of its shallow shape. It secures an abundance of high initial velocity area on the face to create distance with the forgiveness made possible with a larger CG angle and deep CG.
Its shaft, developed in collaboration with Fujikura, accelerates the head and allows golfers to solidly swing through impact.
The high initial velocity area is 140% compared to the average size of other brand drivers, which enables a steady flight distance
[New High-Initial-Velocity Area］
This is the area on the face that provides COR measurement of 0.81* or greater.
*This is a calculated value based on measurements taken on a doppler radar device. Based on a PRGR study (January 2019)
PRGR RS Red Driver Specification
| Shaft | S (M43) | SR (M40) | R (M37) | R2 (M35) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Loft(°) | 9.5 | 10.5 | 9.5 | 10.5 | 11.5 | 9.5 | 10.5 | 11.5 | 10.5 | 11.5 |
| Volume(cm3) | 460 | |||||||||
| Face (°) | -1.0 | |||||||||
| Lie (°) | 59.5 | |||||||||
| Length(inch) | 46.0 | 45.5 | ||||||||
| Total W (g) | 278 | 278 | 273 | 273 | 273 | 271 | 271 | 271 | 270 | 270 |
| Balance | D-1.0 | D-1.0 | D-0 | D-0 | D-0 | D-0 | D-0 | D-0 | C-7.5 | C-7.5 |
| Shaft W(g) | 46 | 46 | 42 | 42 | 42 | 41 | 41 | 41 | 39 | 39 |
| Torque(°) | 6.9 | 6.9 | 8.1 | 8.1 | 8.1 | 8.1 | 8.1 | 8.1 | 8.5 | 8.5 |
| Shaft KP | H | |||||||||
| Grip | Weight: 36.0, Diameter: 60, Code: None, Back line: Yes | |||||||||
| Material | Face:Titanium(TP2) Body:Titanium(Ti-811Plus) |
|||||||||
| Process | Face: Forged Body: Vacuum precision casting |
|||||||||
PRGR RS Red Iron
The RS RED Iron comes with a low center of gravity design that places the height of its vertical CG at 20mm. The ball will launch easily as the golfer hits it with its 27° strong loft design for the 7 iron. The Double Design, where the backside grooves are cut into its thin Titanium L Cup face, enhances and widens the sweet spot lower on the face to produce even more distance. The initial ball speed at the lower section of the face around 17mm off the ground has been enhanced greatly thanks to this design. This is lower than your typical irons which translates into mis-shots low on the face will still provide very good distance performance. This is the forgiveness that these irons provide.
PRGR RS Red Iron Specification
| Club | #5 | #6 | #7 | #8 | #9 | Pw | Aw | Sw | |
|---|---|---|---|---|---|---|---|---|---|
| Loft / Bounce(°) | 23 | 25 | 27 | 31 | 36 | 41 | 48/9.0 | 55/11.0 | |
| Lie(°) | 62.0 | 62.5 | 63.0 | 63.5 | 64.0 | 64.5 | 64.5 | 64.5 | |
| F.P(mm) | 2.5 | 3.0 | 3.0 | 3.5 | 4.0 | 4.0 | 4.0 | 4.5 | |
| Length(“) | S (M-43) | 38.50 | 38.00 | 37.50 | 37.00 | 36.50 | 36.00 | 35.50 | 35.50 |
| SR (M-40) | 38.50 | 38.00 | 37.50 | 37.00 | 36.50 | 36.00 | 35.50 | 35.50 | |
| R (M-37) | 38.50 | 38.00 | 37.50 | 37.00 | 36.50 | 36.00 | 35.50 | 35.50 | |
| R2 (M-35) | 38.00 | 37.50 | 37.00 | 36.50 | 36.00 | 35.50 | 35.00 | 35.00 | |
| SOFT STEEL M-40 (SR) | 38.25 | 37.75 | 37.25 | 36.75 | 36.25 | 35.75 | 35.25 | 35.25 | |
| SOFT STEEL M-37 (R) | 38.25 | 37.75 | 37.25 | 36.75 | 36.25 | 35.75 | 35.25 | 35.25 | |
| Total W(g) | S (M-43) | 344 | 349 | 354 | 363 | 369 | 377 | 384 | 383 |
| SR (M-40) | 340 | 345 | 351 | 359 | 366 | 375 | 382 | 381 | |
| R (M-37) | 340 | 345 | 351 | 359 | 365 | 374 | 381 | 381 | |
| R2 (M-35) | 339 | 344 | 349 | 358 | 364 | 373 | 380 | 379 | |
| SOFT STEEL M-40 (SR) | 369 | 376 | 382 | 390 | 396 | 404 | 411 | 410 | |
| SOFT STEEL M-37 (R) | 365 | 372 | 378 | 385 | 392 | 399 | 406 | 405 | |
| Balance | S (M-43) | D-0.5 | |||||||
| SR (M-40) | D-0 | ||||||||
| R (M-37) | D-0 | ||||||||
| R2 (M-35) | C-7.0 | ||||||||
| SOFT STEEL M-40 (SR) | D-2.0 | ||||||||
| SOFT STEEL M-37 (R) | D-2.0 | ||||||||
| Shaft W(g) | S (M-43) | 53 | 53 | 53 | 54 | 54 | 55 | 56 | 56 |
| SR (M-40) | 50 | 50 | 51 | 52 | 52 | 54 | 55 | 55 | |
| R (M-37) | 50 | 50 | 50 | 51 | 52 | 53 | 55 | 55 | |
| R2 (M-35) | 49 | 49 | 49 | 50 | 50 | 52 | 53 | 53 | |
| SOFT STEEL M-40 (SR) | 80 | 80 | 80 | 80 | 80 | 81 | 81 | 81 | |
| SOFT STEEL M-37 (R) | 76 | 76 | 76 | 76 | 76 | 76 | 76 | 76 | |
| Torque(°) | S (M-43) | 4.1 | 3.6 | 3.6 | 3.5 | 3.3 | 3.2 | 3.2 | 3.2 |
| SR (M-40) | 4.3 | 4.1 | 3.8 | 3.6 | 3.4 | 3.3 | 3.1 | 3.1 | |
| R (M-37) | 4.3 | 4.1 | 3.8 | 3.7 | 3.4 | 3.2 | 3.1 | 3.1 | |
| R2 (M-35) | 4.3 | 4.1 | 3.8 | 3.6 | 3.5 | 3.3 | 3.1 | 3.1 | |
| SOFT STEEL M-40 (SR) | 2.8 | 2.7 | 2.6 | 2.6 | 2.5 | 2.4 | 2.3 | 2.3 | |
| SOFT STEEL M-37 (R) | 3.2 | 3.1 | 3.0 | 2.9 | 2.9 | 2.8 | 2.7 | 2.7 | |
| Shaft KP | H | ||||||||
| Grip | Weight: 36.0, Diameter: 60, Code: None, Back line: Yes | ||||||||
| Material | Face:Titanium(Ti-6Al-4V) Body:Stainless(SUS630) |
||||||||
| Process | Face: Rolled metal Body: Precision casting |
||||||||
